- Видео 1 050
- Просмотров 7 916 470
TheBrazilianHotDog724
США
Добавлен 8 апр 2017
Door guy
Home of the 4x3'6 Midland
go follow the insta @tbhd724 to get sneak peeks and updates before they're on youtube
Home of the 4x3'6 Midland
go follow the insta @tbhd724 to get sneak peeks and updates before they're on youtube
Видео
LiftMaster 2245 Off the Rail
Просмотров 4589 часов назад
Been a while since I've shown this one so I decided to set it up and run it.
*OLD VIDEO* Stanley ST400 on the Small Door
Просмотров 1 тыс.9 часов назад
*OLD VIDEO* Stanley ST400 on the Small Door
*OLD VIDEO* Genie CM8600-XL/M on the Mini Door
Просмотров 43612 часов назад
*OLD VIDEO* Genie CM8600-XL/M on the Mini Door
Automatic Doorman 455 on Full Rail
Просмотров 46114 дней назад
The automatic doorman on a Chamberlain sectional T-Rail.
3255 Coasting
Просмотров 1,7 тыс.14 дней назад
Since the motor bearings on the 3255 are set pretty loose it coasts quite a bit, and I discovered something interesting with this opener when I was messing around with it.
Overhead Door 70Z-1 on the Small Door
Просмотров 1,4 тыс.14 дней назад
I wasn't able to leave this up for a few reasons (flywheel scrapes the angle iron, door scrapes the rail, chain way too loose) but it was still neat to see this up here.
*OLD VIDEO* Chamberlain B970 on the Small Door
Просмотров 1,6 тыс.14 дней назад
*OLD VIDEO* Chamberlain B970 on the Small Door
Remote Collection
Просмотров 89414 дней назад
The only thing I missed was I believe the 877LM keypad for the 8365 on the small door. Other than that this is everything I've collected over the years.
LiftMaster 3255 on the Small Door
Просмотров 1,4 тыс.21 день назад
Got tired of listening to the DC motor whine on the HD900D so I replaced it with the 3255
How to Set Limits on Older Chamberlain/LiftMaster/Craftsman DC Belt and Screw Drives
Просмотров 65421 день назад
How to Set Limits on Older Chamberlain/LiftMaster/Craftsman DC Belt and Screw Drives
Chamberlain HD900D on the Small Door
Просмотров 2,7 тыс.Месяц назад
Chamberlain HD900D on the Small Door
How to Adjust Limits on Old Chamberlain/LiftMaster/Sears V-Belt Drive Garage Door Openers
Просмотров 335Месяц назад
How to Adjust Limits on Old Chamberlain/LiftMaster/Sears V-Belt Drive Garage Door Openers
Run of the ProMax/HD200D Without the Door
Просмотров 1,8 тыс.Месяц назад
Run of the ProMax/HD200D Without the Door
Finding and Programming Remotes for Old Sears Garage Door Openers
Просмотров 788Месяц назад
Finding and Programming Remotes for Old Sears Garage Door Openers
sounds like a DC motor on the way up, wish that chamberlain and liftmaster went to AC motor instead of DC motor 😔
This shouldve have a F1 motor
Garage door 8165 has my house
Can you throw this on the small door?
I'll add it to the list
Where can I get parts for Genie C H 125
Parts for these have been discontinued for a while. The only place you might be able to find parts is ebay but its not likely
I love these remotes. My old neighbors Craftsman had one of those.
As of when you reply, how much cycles does coffee grinder have?
iirc it has 15,000 plus a few hundred
@TBHD724 i have an uncle, his 8550GDM from September of 2011 has approx. 19,000-20,000 cycles on his
Do you have the LiftMaster 2000sdr?
No
@@TBHD724 oh okay you think you could get one whenever you can I have the Craftsman variant
A way to wake the whole neighborhood up 💀
I never new liftmaster made this I thought the made 8165’s
missed that model
What does MVIS mean
M - Motor V - Vibration I - Isolation S - System
I have 2 of these at my house and im not a real fan of them.
They aren't the greatest but they're the best belt drive opener LM offers at the moment
Whats the clicking sound when you run the opener on its "Travel learn" door. I hear it before the trolley moves
Not 100% sure, but I think there's different relays that control different motor speeds. There's a whole separate board in these just for the motor control
8155's should atleast have a F1 motor.
Hello
LM shouldve kept the 8355
I think so too😂😂
@@Gdguy109 yeah i agree still have a liftmaster 8355, liftmaster is like discontinuing their openers to new ones
I like how there’s a random genie just hanging out on the ceiling lol
Decoration lol
Oi cachorro quente Brasileiro, we have the Chamberlain 1100 garage opener at our home. I am trying to connect the homelink button on my car to connect to it, but I think the system it is to old and it isn't recognizing.
You might need to try clearing the homelink. Press and hold the outer 2 buttons until the light starts flashing then try the programming steps again
@@TBHD724 I have already done it couple of time. nothing works, maybe as I say the garage door system I have it is too old.
Some car manuals or videos don't mention that you might need to hit the learn button on the back of the opener and press the homelink button again to finish programming. Try that if you haven't already, otherwise if other remotes work fine with the opener it's probably got something to do with the homelink version either being outdated or too new to learn the code for something this old
@@TBHD724 Thank you, I will try tomorrow. But I think the 2021 homelink version maybe isn't working well with the 1994 Chamberlain 1100.
This one is a very lucky one, amazingly quiet!
Very quiet
Pretty quiet
Nice stanley
Stanley made some good openers!
Lol first one to comment on this vid
No one cares
@@AdamRuiz-hk4kb true
I had one of these at the old house but now I have a Craftsman 139.53963srt
Nice opener
Nice opener
Hey can a newer garage door remote be programed to one of these older units? If so how thanks
If you have an existing remote that already works, the liftmaster 892LT is an easy one to program. If you don't have a remote, get either a liftmaster 811LMX or 61LM which are both compatible with this opener
@@TBHD724 thanks for the reply I'll look into those model remotes👍🏽
ngl ryobi opener fucking suck
can i still chat with anyone of yall on discord
How old are the springs in this door?
few years
@@TBHD724It will take forever for it to break lol
Great tutorial. I own a Genie Pro with a screw drive. Lately I'm experiencing problems. The garage door will open but often not close or reverses direction back open in the middle of closing the door. It almost looks like it's tired when closing. I followed the steps from this video. I roughed up the Reluctor Hub and Clutch Pad and tighten up the clutch adjuster. But no improvement. I'm not sure what I can do to resolve the issue.
If the motor sounds like it's bogging down when it runs it means you need to replace the capacitor. It's a really cheap easy fix
How did you get in that building?
Beware, mine was confused,my "easy " button feature was not working, pulled power for a half hour. Fixed issue
Nice! My cousin has an HD220 from 2014!
Nicely done sir very appreciative.
Why such low audio? I have my volume all way up &yet cant hear you..
who house is it?
Rare opener nice find
Rare opener
do you know if this one is dip switch or intellicode
Intellicode
@@bobman11100 interesting cause one time I found a Legacy that was dip switch
I just got one today from a trailer
Such an odd machine. I remember questioning why they were putting it into production when our rep was pushing them. He said they only intended them for track homes and lightweight builder doors but I guess they didn’t sell well cause they were pretty short lived.
I've never seen one where I live. I'd like to get my hands on one, though
Hi!! Urgent help needing have this opener in a rental house and the remote which is model 3089-11 suddenly stopped working. What do I do. Battery works, but doesn’t run door. It was original to the opener installed in1981. HELP
Few things to check/try 1. Make sure dip switches match. If they look like they match and it still doesn't work, try flipping them all to the opposite position they are now and see if that works 2. Sometimes a low battery will still turn on the LED but won't generate a strong enough signal to reach the opener, so try a new battery and see if it helps 3. If still nothing, flip every switch to the same position (all up or all down) on the remote and the opener. If this doesn't work then you'll need a new remote
@@TBHD724 Thank you. You saved me…
@@TBHD724 *THANK YOU* I looked at this message saying “what the heckers am I supposed to do” when my 3 year old goddaughter Abigail (who is staying with her family and me in the rental house) said “first this, then this, and now it works. Unbelievably, she did all this and then pressed the remote and the door closed! Case closed!
I have this exact opener installed in my garage. My goddaughter Abigail loved this video, the opener sounds almost exactly like mine but mine is in a Filuma door so it’s very crinkly sounding and squeaky when it runs. Thank you:)
My 3 year old goddaughter Abbey loves garage doors. Particularly the OHD Phantom installed in my garage. Subbed to your channel to see new garage doors very often. It prevents her from running my garage door (there are two but only one is in use) into the ground. Thank you for sharing your knowledge of garage doors. Really appreciate it.
pretty quiet opener, it just needs some lubrication on the rollers
Was this the main opener that came with the house or had a different opener on it?
There used to be an OHD Python chain glide
oh.
What happend to that opener?
Don't know
Nice 8010